Pivot Points: How to Trade Support and Resistance

Pivot points are used every day in trading to identify the market’s psychological levels. They are based on the market trend and on the support and resistance levels on a chart. In this guide, we reveal everything you need to know about using this indicator in trading.

Pivot Point: Definition

The pivot technique aims to determine a market’s trend across time intervals. It is used to define the directional movement of the trend and support zones on a chart.

Its main features are as follows:

  • this technique is relatively old
  • it still serves traders on different markets, such as futures and commodities
  • the support versus resistance method is effective on highly liquid markets such as stock indices.

Using this indicator means relying on five levels:

  • one pivot,
  • two supports
  • two resistances.

It gives traders a better reading of the market price during the day. Before opening positions, the trader uses the previous day’s data to make their calculations. They therefore know, before the session opens, which levels will support their forecasts.

If this topic interests you, also check out “Trading in France” and “Crypto Trader Review”.

Support and Resistance Levels – Definition

In a financial market, support and resistance levels represent supply and demand in active fluctuation. More concretely, they are where the market’s bullish forces (bulls) meet its bearish forces (bears). It then remains to be seen which side will prevail after this clash.

What characterizes support and resistance levels?

  • If you draw every level, the chart could become unreadable because of clutter.
  • You should only draw the most relevant levels on the chart.
  • To decide whether a level is relevant, look at the ones the market respects.

Why Pivot Points Matter to Traders

The MT4 pivot indicator technique is of paramount importance to traders during trading sessions.

  • It serves as a psychological threshold or warning signal for many investors.
  • Its points can be used as major support or resistance lines while trading.
  • Traders use the support and resistance technique to identify key levels on charts.
  • Using the pivot, traders can tell when prices bounce up or down.

Pivot Points and the Stock Market – The Different Types of Indicator

The effectiveness of the support and resistance indicator comes from the fact that asset prices (stocks, commodities, indices, currencies, etc.) are likely to change within the defined zones. They may stabilize, bounce or fall.

Apart from the classic pivot point indicator, there are several other types, each with its own features:

The Camarilla Variant

You will find several definitions of the Camarilla strategy in online trading courses or PDF guides. It is used to quickly identify whether the market is bullish or bearish by looking at the chart. In short, Camarilla pivot points are a method for determining trends and ranges, made possible because the indicator automatically sets relevant support and resistance levels.

To sum up what makes Camarilla a popular method in forex and other trading strategies:

  • The indicator automatically generates S&R levels for each trading session
  • Camarilla is a quick way to access data
  • The trader does not need to adjust or calculate anything manually
  • The Camarilla method keeps the chart simple with six basic lines (3 red, 3 green)
  • It is easy to determine the price trend. When the price is outside the H3 and L3 zones, it is either above H3 in an uptrend or below L3 in a downtrend.

The Fibonacci Variant

The Fibonacci method is not very different from the classic version, as it uses the same elements to calculate the pivot point for a trading session. The method is named after Fibonacci because the Fibonacci number sequence is used to calculate the pivot supports and resistances.

Ken Wood’s “Woodie” Variant

The Woodie indicator is more than just an indicator: it is a complete trading system. It was created by Ken Wood, who also set up a trading club called the Woodie CCI Club, where many traders share their techniques and personal experience.

Tom DeMark Pivot Points

The TD (Tom DeMark) trendline method changes the subjective approach to chart analysis of trendlines, turning it into an essentially mechanical process. This method requires paying more attention to the most recent price movements than to prices from previous days.

Why Use the Support and Resistance Indicator in 2025?

An important safety role in trading: it helps avoid the risk of sudden reversals when scalping without support and resistance levels. For example, if you open a position during a sharp rise or fall in price, you have no protection in the event of a sudden reversal.

A decisive psychological factor: experienced traders go on alert when prices reach support and resistance levels. At that point, a trend reversal is very likely in the making.

How to Calculate a Pivot Indicator

Pivot point calculations are based on the time period considered. They can be:

  • daily, based on the previous day’s data
  • weekly, based on the previous week’s data
  • monthly, based on the previous month’s data

Pivot point calculations always come with the calculation of the corresponding supports and resistances.

With the classic method, the calculation generally uses three parameters: the previous day’s high, the previous day’s low and the closing price. The formulas are as follows:

  • Pivot Point (P) = (High + Low + Close) / 3
  • Support 1 (S1) = (P x 2) – High
  • Support 2 (S2) = P – (High – Low)
  • Resistance 1 (R1) = (P x 2) – Low
  • Resistance 2 (R2) = P + (High – Low).

Interpreting the Formula in Trading

After calculating the support and resistance indicator, you need to draw up an action plan. Once the trader has determined the different levels, they plot them on the chart for better visibility. The interpretation is as follows:

  • the pivot is the most important level
  • when the price moves above the highest point, the trend is bullish.
  • when the price is below the pivot, the trend is said to be bearish.

From then on, the trader’s reaction is mechanical:

  • they become a buyer when prices are above the pivot and a seller when they are below it
  • they use the support levels (S1 and S2) and resistance levels (R1 and R2) to fine-tune their trading strategy.

How to Use Pivot Points on the Stock Market

The effectiveness of pivot points depends on how you use them, since they remain tools like any other. Their use therefore varies with the situation.

Tableau originalDiversifiez votre patrimoineInvestissez dans l’artDes tableaux originaux, pièces uniques signées par l’artiste. Un actif tangible, loin des écrans et des cotations.Voir les tableaux →

Finding Buy or Sell Zones

You can use pivot points to identify buy or sell positions on the market. As an indicator, these tools help you work out entry points for buy or sell positions. However, this method is not a miracle solution that will tell you the exact path of the price.

How to Use Stops with Pivot Points in 2025

For a stop to do its job properly, place it above the most recent high or below the most recent low on the chart. For example, with a daily strategy, wait at least 15 minutes after the session opens before placing them.

How to Combine Technical Analysis with the Support and Resistance Indicator

Combining technical analysis with pivot points strengthens the support or resistance level of a position. This combination starts with identifying chart patterns (double bottoms, trendlines, etc.), followed by comparing the pattern’s levels to see whether one of them matches a pivot level.

Which Time Frames to Use for Trading

The time frame depends on the type of trading you choose.

Day Trading with the Support and Resistance Indicator

If you opt for day trading, for example, pivot point supports and resistances are used on daily time frames. Trading with the pivot point indicator relies on calculations made daily on MT4. There is a tendency to believe that the stock price will reach the previous day’s closing level.

Swing Trading with Support and Resistance

Swing trading is a technique for trading positions over several days, weeks or months. To swing trade with a support and resistance indicator, traders will use weekly pivot levels, especially when trading forex. For long-term investments, they will choose a monthly period instead.

How to Scalp with the Support and Resistance Indicator

The pivot point indicator adapts easily to all strategies, including scalping. The time frame can be chosen according to micro price variations around the predefined zone. Scalping will therefore rely on support, resistance and pivot levels when the market is stable near one of the levels.

Since it is used differently in this case, how do you scalp as part of a forex, crypto or stock trading strategy?

  • Scalping forex: in forex, intraday scalping is particularly effective using supports and resistances. You can scalp EUR/USD over 30-minute periods for better results.
  • Scalping stocks: stock scalping strategies work well for trading the CAC 40 and the Nasdaq. Professionals generally use them for a weekly scalping strategy on an H4 chart. You can also scalp the DAX 40, a trending market. Trading the Dow Jones with the support and resistance indicator is also very interesting: the Dow Jones being 80% automated makes the scalping plan very easy. Bear in mind too that scalp trading can be combined with other trading techniques such as the RSI.
  • Crypto scalp trading: scalp trading methods can be used to scalp cryptocurrencies such as Bitcoin (BTC) or other cryptos. A crypto scalping strategy can be set up on Binance or another scalp trading platform.

How to Set Up the S&R Indicator

Since it is already built into trading platforms, the support and resistance indicator is based on a mathematical formula and performs its calculations automatically. Setting it up is therefore fairly easy: it comes down to choosing the display period for the lines (daily, weekly, monthly).

If you plan to use TradingView Pro, setting up the indicator is fairly easy:

  • On the chart, open the list of trading tools the platform offers.
  • Then enter the indicator’s name in the search bar.
  • When it appears, select your indicator by clicking on it.
  • The indicator appears on the chart with its different lines.

Which Markets Can You Use the Indicator On?

Depending on the market, traders need a greater or lesser degree of technical analysis skill. They will need to adapt their analysis with the pivot point support and resistance indicator depending on whether the market is trending or ranging.

If traders use the support and resistance indicator on the forex market, they need fairly advanced technical analysis skills, because it is a very reactive market. It would therefore be difficult for a beginner to cope easily.

On the other hand, this indicator is better suited to derivatives markets such as index futures (S&P 500, Dow Jones, CAC 40, DAX), because these markets respond well to technical analysis.

Pros and Cons of the Pivot Indicator

Pros

Cons

  • It helps you build a trading plan by identifying pressure levels for the trading day

  • The psychological zones it defines are followed by many traders at the same time

  • It can be used on most stock markets

  • The technique works for several types of trading

  • It loses its effectiveness over the very long term

  • The technique is ineffective when the price keeps moving around the pivot

  • The indicator is limited in calm markets

Trading Tips

During a session, keep a very close eye on certain levels:

  • The R3 resistance line and the S3 support line: when an asset’s price reaches one of these levels, it is very likely to bounce, back up from a support or back down from a resistance.
  • Go long at a support and short at a resistance.
  • Take the time to check that it really is a strong signal before taking a position. Above all, avoid trading against the overall trend.

Conclusion – Key Takeaways on the Pivot Point Indicator in 2025

The pivot indicator’s effectiveness means that many traders use it in their strategies. It is therefore common to see several traders with the same reference zones and the same technical analysis. Most traders have come to realize that these indicators are more significant on medium- and long-term time frames, so they calculate pivot points using weekly and monthly prices.

We can conclude that the pivot point support and resistance indicator produces better results when its analysis is based on a longer period. This can be verified when chart or technical analysis is based on long-term historical data. In addition, the fact that many traders watch the same levels provides extra security for your strategy.
Finally, for greater effectiveness, we recommend taking a position when you detect a strong reversal signal.

Still have questions or doubts about the support and resistance indicator? Leave us a comment and we will give you more information.

Suivez-nous sur Telegram